Изминить частоту обнавления

Аватар пользователя As0rn0

Здравствуйте =)
возникла такая проблема с xorg.conf у меня не получается изменить частоту обновление экрана! При расширение в 1280х1024 частоте не выставляется больше 50 =( мне бы хотя бы 60... ни драва для видио не дисплея точно не определяются (для моника выставил на обум)
У меня NVIDIA GeForce FX Go5700 64mb (ноут =)
вот что у меня в xorg.conf
[marqv]# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules/extensions/nvidia"
ModulePath "/usr/X11R6/lib/modules"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "fbdevhw"
Load "record"
Load "freetype"
Load "type1"
Load "synaptics"
Load "glx"
Load "dbe"
Load "extmod"
Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Aspire 77s"
HorizSync 30.0 - 72.0
VertRefresh 50.0 - 120.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce FX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

[/marqv]

Аватар пользователя Meloman

изминить частоту обнавления

Это я один вижу мерцание сообщений?

Аватар пользователя IsakovAN

Re: изминить частоту обнавления

Выдержка из man xorg.conf:

MONITOR SECTION
       HorizSync  horizsync-range
              gives the range(s) of horizontal sync frequencies supported by the monitor.  horizsync-range may be a comma  sepa-
              rated  list  of  either discrete values or ranges of values.  A range of values is two values separated by a dash.
              By default the values are in units of kHz.  They may be specified in MHz or Hz if MHz or Hz is added to the end of
              the  line.   The  data given here is used by the Xorg server to determine if video modes are within the specifica-
              tions of the monitor.  This information should be available in the monitor's handbook.  If this entry is  omitted,
              a default range of 28-33kHz is used.

       VertRefresh  vertrefresh-range
              gives  the  range(s)  of  vertical refresh frequencies supported by the monitor.  vertrefresh-range may be a comma
              separated list of either discrete values or ranges of values.  A range of values is  two  values  separated  by  a
              dash.   By  default  the values are in units of Hz.  They may be specified in MHz or kHz if MHz or kHz is added to
              the end of the line.  The data given here is used by the Xorg server to determine if video modes  are  within  the
              specifications  of the monitor.  This information should be available in the monitor's handbook.  If this entry is
              omitted, a default range of 43-72Hz is used.
RSS-материал