GeForce FX 5200

Автор: DINETS Дата: 03.11.2010 23:48
после установки драйверов для карты
Х валится от ошибки сегментации

Kernel 2.6.27.25-78.2.56.0.140asp.i686
если поменять конфиги икса на те что были до установки всё работает
но очень хоца драйвера использовать

Re: GeForce FX 5200 04.11.2010 11:23BigAndy
Логи xorg телепатам предлагаете угадывать?
Скорее всего у вас проблемы с kmod/akmod nvidia.
Re: GeForce FX 5200 05.11.2010 12:20DINETS
не мой то камп.....
хорошо принесу
но при запуске иксов в консоли была ошибка сегментции а так ничего небыло
Re: GeForce FX 5200 09.11.2010 00:00DINETS
вывод при попытке запуска X :1
на уровне запуска 3 (вывод консоли поток ошибок)
X.Org X Server 1.5.0
Release Date:
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-53.1.21.el5.asp121 i686
Current Operating System: Linux localhost.localdomain 2.6.27.25-78.2.56.0.140asp.i686 #1 SMP Tue Jul 7 16:58:15 EDT 2009 i686
Build Date: 23 September 2008 10:39:49AM
Build ID: xorg-x11-server 1.5.0-2.0.140asp
Before reporting problems, check [wiki.x.org]
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Mon Nov 8 21:52:25 2010
(==) Using config file: "/etc/X11/xorg.conf"
Error: API mismatch: the NVIDIA kernel module has version 173.14.15,
but this NVIDIA driver component has version 173.14.28. Please make
sure that the kernel module and all NVIDIA driver components
have the same version.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0): that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

а тут содержимое последнего ЛОГ файла

X.Org X Server 1.5.0
Release Date:
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-53.1.21.el5.asp121 i686
Current Operating System: Linux localhost.localdomain 2.6.27.25-78.2.56.0.140asp.i686 #1 SMP Tue Jul 7 16:58:15 EDT 2009 i686
Build Date: 23 September 2008 10:39:49AM
Build ID: xorg-x11-server 1.5.0-2.0.140asp
Before reporting problems, check [wiki.x.org]
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Mon Nov 8 21:31:55 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81ee400
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@2:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xdc000000/0, 0xd0000000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SELinux
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:17:05 PDT 2010
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.99.901, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.99.901, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 09:55:18 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 02@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"

(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0): that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

ясное дело то что косяк с драйверами
...
ещё модуль nvidia 7090940 0 что видно из вывода lsmod живёт и здравствует....
а остальное я даже не знаю что где крутить

Re: GeForce FX 5200 09.11.2010 01:27BigAndy
Так вам же написали:

Error: API mismatch: the NVIDIA kernel module has version 173.14.15, 
but this NVIDIA driver component has version 173.14.28. Please make 
sure that the kernel module and all NVIDIA driver components 
have the same version.

Re: GeForce FX 5200 10.11.2010 00:15DINETS
брррррр модуль для ядра и драйвер это разные вещи?
ммм а есть дето инфа про это всё ?

ставили драйвера только под видео карту тоесть драйвера свеженькие а модуль нвидии был раньше на кампе
значит нада найти модуль ядра нвидии посвежее ..... ща загляну на нвидиа

Re: GeForce FX 5200 13.11.2010 17:27CORSAR
Всё установил успешно , только после установки когда запустил glxgears шестеренки поработали немного и окно закрылось. В терминале появилось `Аварийный останов` . После повторного запуска glxgears выдало
[corsar@localhost Рабочий стол]$ glxgears
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual
[corsar@localhost Рабочий стол]$ 

Запустил dmesg

Initializing cgroup subsys cpuset
Linux version 2.6.27.25-78.2.56.0.140asp.i686 (mockbuild@) (gcc version 4.3.0 20080428 (ASPLinux 4.3.0-8) (GCC) ) #1 SMP Tue Jul 7 16:58:15 EDT 2009
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
 BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
 BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x2fff0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 2fff0000 @ 7000-d000
Using x86 segment limits to approximate NX protection
RAMDISK: 2fcb7000 - 2ffdf127
ACPI: RSDP 000F70F0, 0014 (r0 Nvidia)
ACPI: RSDT 2FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
ACPI: FACP 2FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
ACPI: DSDT 2FFF30C0, 4E35 (r1 NVIDIA AWRDACPI     1000 MSFT  100000C)
ACPI: FACS 2FFF0000, 0040
ACPI: APIC 2FFF7F00, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD  1010101)
0MB HIGHMEM available.
767MB LOWMEM available.
  mapped low ram: 0 - 2fff0000
  low ram: 00000000 - 2fff0000
  bootmap 00009000 - 0000f000
(9 early reservations) ==> bootmem [0000000000 - 002fff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 00008cb394]    TEXT DATA BSS ==> [0000400000 - 00008cb394]
  #4 [002fcb7000 - 002ffdf127]          RAMDISK ==> [002fcb7000 - 002ffdf127]
  #5 [00008cc000 - 00008d0000]    INIT_PG_TABLE ==> [00008cc000 - 00008d0000]
  #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
  #8 [0000009000 - 000000f000]          BOOTMAP ==> [0000009000 - 000000f000]
found SMP MP-table at [c00f5790] 000f5790
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0002fff0
  HighMem  0x0002fff0 -> 0x0002fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0002fff0
On node 0 totalpages: 196495
free_area_init_node: node 0, pgdat c0757780, node_mem_map c1000000
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 190992 pages, LIFO batch:31
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
PERCPU: Allocating 41116 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194959
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07fa000 soft=c07da000
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1742.827 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 770452k/786368k available (2324k kernel code, 15256k reserved, 1198k data, 388k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB-)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB-)
    vmalloc : 0xf0800000 - 0xff3fe000   ( 235 MB-)
    lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB-)
      .init : 0xc0776000 - 0xc07d7000   ( 388 kB-)
      .data : 0xc06452d0 - 0xc0770ad8   (1198 kB-)
      .text : 0xc0400000 - 0xc06452d0   (2324 kB-)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3485.65 BogoMIPS (lpj=1742827)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Sempron(tm)   2500+ stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3485.65 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3244 bytes
CPU0 attaching NULL sched-domain.
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
Time: 14:03:02  Date: 11/13/10
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb6f0, last bus=2
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [d8000000, dbffffff]
pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
PCI: 0000:00:01.1 reg 10 io port: [a400, a41f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
PCI: 0000:00:02.0 reg 10 32bit mmio: [e0003000, e0003fff]
pci 0000:00:02.0: supports D1
pci 0000:00:02.0: supports D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
PCI: 0000:00:02.1 reg 10 32bit mmio: [e0004000, e0004fff]
pci 0000:00:02.1: supports D1
pci 0000:00:02.1: supports D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
PCI: 0000:00:02.2 reg 10 32bit mmio: [e0005000, e00050ff]
pci 0000:00:02.2: supports D1
pci 0000:00:02.2: supports D2
pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PME# disabled
PCI: 0000:00:06.0 reg 10 io port: [9400, 94ff]
PCI: 0000:00:06.0 reg 14 io port: [9800, 987f]
PCI: 0000:00:06.0 reg 18 32bit mmio: [e0001000, e0001fff]
pci 0000:00:06.0: supports D1
pci 0000:00:06.0: supports D2
PCI: 0000:00:09.0 reg 20 io port: [f000, f00f]
PCI: 0000:00:0b.0 reg 10 io port: [9f0, 9f7]
PCI: 0000:00:0b.0 reg 14 io port: [bf0, bf3]
PCI: 0000:00:0b.0 reg 18 io port: [970, 977]
PCI: 0000:00:0b.0 reg 1c io port: [b70, b73]
PCI: 0000:00:0b.0 reg 20 io port: [b800, b80f]
PCI: 0000:00:0b.0 reg 24 io port: [bc00, bc7f]
PCI: 0000:01:09.0 reg 10 io port: [8000, 80ff]
PCI: 0000:01:09.0 reg 14 32bit mmio: [df000000, df0000ff]
PCI: 0000:01:09.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:09.0: supports D1
pci 0000:01:09.0: supports D2
pci 0000:01:09.0: PME# supported from D1 D2 D3hot
pci 0000:01:09.0: PME# disabled
PCI: bridge 0000:00:08.0 io port: [8000, 8fff]
PCI: bridge 0000:00:08.0 32bit mmio: [de000000, dfffffff]
PCI: 0000:02:00.0 reg 10 32bit mmio: [dc000000, dcffffff]
PCI: 0000:02:00.0 reg 14 32bit mmio: [d0000000, d7ffffff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff]
PCI: bridge 0000:00:1e.0 32bit mmio: [dc000000, ddffffff]
PCI: bridge 0000:00:1e.0 32bit mmio pref: [d0000000, d7ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 22) *0
ACPI: Power Resource [ISAV] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
ACPI: RTC can wake from S4
system 00:00: ioport range 0x4000-0x407f has been reserved
system 00:00: ioport range 0x4080-0x40ff has been reserved
system 00:00: ioport range 0x4400-0x447f has been reserved
system 00:00: ioport range 0x4480-0x44ff has been reserved
system 00:00: ioport range 0x4200-0x427f has been reserved
system 00:00: ioport range 0x4280-0x42ff has been reserved
system 00:01: ioport range 0x5000-0x503f has been reserved
system 00:01: ioport range 0x5100-0x513f has been reserved
system 00:02: iomem range 0xf0000-0xf3fff could not be reserved
system 00:02: iomem range 0xf4000-0xf7fff could not be reserved
system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
system 00:02: iomem range 0xfc000-0xfffff could not be reserved
system 00:02: iomem range 0x2fff0000-0x2fffffff could not be reserved
system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
system 00:02: iomem range 0x0-0x9ffff could not be reserved
system 00:02: iomem range 0x100000-0x2ffeffff could not be reserved
system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0x800-0x805 has been reserved
system 00:04: ioport range 0x290-0x29f has been reserved
pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
pci 0000:00:08.0:   IO window: 0x8000-0x8fff
pci 0000:00:08.0:   MEM window: 0xde000000-0xdfffffff
pci 0000:00:08.0:   PREFETCH window: 0x00000040000000-0x000000400fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xdc000000-0xddffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
pci 0000:00:08.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [8000, 8fff]
bus: 01 index 1 mmio: [de000000, dfffffff]
bus: 01 index 2 mmio: [40000000, 400fffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [dc000000, ddffffff]
bus: 02 index 2 mmio: [d0000000, d7ffffff]
bus: 02 index 3 mmio: [0, 0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3232k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1289656982.544:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1511
SELinux:  Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:02:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected NVIDIA nForce2 chipset
agpgart-nvidia 0000:00:00.0: AGP aperture is 64M @ 0xd8000000
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
PNP: PS/2 Controller [PNP0303:-PS2K,PNP0f13:-PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 2:6:81
Freeing unused kernel memory: 388k freed
Write protecting the kernel text: 2328k
Write protecting the kernel read-only data: 972k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 21 (level, high) -> IRQ 21
ehci_hcd 0000:00:02.2: setting latency timer to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
ehci_hcd 0000:00:02.2: irq 21, io mem 0xe0005000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.25-78.2.56.0.140asp.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, high) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 20, io mem 0xe0003000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.25-78.2.56.0.140asp.i686 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: setting latency timer to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 21, io mem 0xe0004000
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: New USB device found, idVendor=1005, idProduct=b113
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB FLASH DRIVE
usb 1-2: Manufacturer:         
usb 1-2: SerialNumber: 079B03074099111B
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.25-78.2.56.0.140asp.i686 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.1
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
pata_acpi 0000:00:09.0: power state changed by ACPI to D0
pata_acpi 0000:00:09.0: setting latency timer to 64
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
pata_acpi 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 22 (level, high) -> IRQ 22
pata_acpi 0000:00:0b.0: setting latency timer to 64
pata_acpi 0000:00:0b.0: PCI INT A disabled
pata_amd 0000:00:09.0: version 0.3.10
pata_amd 0000:00:09.0: power state changed by ACPI to D0
pata_amd 0000:00:09.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata1.00: HPA detected: current 234439535, native 234441648
ata1.00: ATA-7: ST3120814A, 2AAA, max UDMA/100
ata1.00: 234439535 sectors, multi 16: LBA48 
ata1: nv_mode_filter: 0x3f39f&0x701f->0x701f, BIOS=0x7000 (0xc00000c0) ACPI=0x701f (60:600:0x13)
ata1.00: configured for UDMA/33
ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000c0) ACPI=0x701f (600:60:0x1c)
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      ST3120814A       2AAA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234439535 512-byte hardware sectors (120033 MB-)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234439535 512-byte hardware sectors (120033 MB-)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <a href="mailto:dm-devel@redhat.com">dm-devel@redhat.com</a>
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1289656990.591:2): selinux=0 auid=4294967295 ses=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:1:0: Attached scsi generic sg1 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sata_nv 0000:00:0b.0: version 3.5
sata_nv 0000:00:0b.0: PCI INT A -> Link[APSI] -> GSI 22 (level, high) -> IRQ 22
sata_nv 0000:00:0b.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xb800 irq 22
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xb808 irq 22
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
processor ACPI0007:00: registered as cooling_device0
8139too Fast Ethernet driver 0.9.28
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
8139too 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xf0974000, 00:19:e0:13:b0:17, IRQ 17
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
Intel ICH 0000:00:06.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50659 usecs
intel8x0: clocking to 47370
input: PC Speaker as /devices/platform/pcspkr/input/input5
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
nvidia 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.15  Fri Oct 31 16:03:05 PST 2008
gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 59659kHz
ppdev: user-space parallel port driver
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
scsi 4:0:0:0: Direct-Access              USB FLASH DRIVE  PMAP PQ: 0 ANSI: 0 CCS
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 4:0:0:0: [sdb] 7833600 512-byte hardware sectors (4011 MB-)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 7833600 512-byte hardware sectors (4011 MB-)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
Adding 1572856k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1572856k
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: no IPv6 routers present
fuse init (API version 7.9)
glxinfo[2595]: segfault at 0 ip 0804a642 sp bf9ff270 error 4 in glxinfo[8048000+5000]
tomboy[2480]: segfault at d052f8 ip 00d052f8 sp bfaec29c error 4

Допоможiть , будьласка =)

<b><span><KEEP IT BRUTAL></span></b>
Re: GeForce FX 5200 13.11.2010 17:33CORSAR
Это мой Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder57)  Fri Oct 31 16:32:22 PST 2008

# Xorg configuration created by livna-config-display

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    ModulePath      "/usr/lib/xorg/modules"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "AIGLX" "on"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option         "XkbLayout" "ru,us"
    Option         "XkbModel" "pc105"
    Option         "XkbOptions" "grp:shift_toggle,grp_led:scroll"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Enable"
EndSection

<b><span><KEEP IT BRUTAL></span></b>
Re: GeForce FX 5200 13.11.2010 17:37CORSAR
А еще при перезагрузке выдаёт ошибку :
No akmods packages found

хотя я всё установил вроде... и akmod и kmod

<b><span><KEEP IT BRUTAL></span></b>
Re: GeForce FX 5200 13.11.2010 18:20CORSAR
после переключения на любой терминал (например Ctrl+Alt+F1) и обратно то xorg.conf меняется на
# Xorg configuration created by livna-config-display

Section "ServerLayout"
	Identifier     "Layout0"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "type1"
	Load  "freetype"
	Load  "glx"
EndSection

Section "ServerFlags"
	Option	    "AIGLX" "on"
EndSection

Section "InputDevice"

    # generated from default
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from data in "/etc/sysconfig/keyboard"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbLayout" "ru,us"
	Option	    "XkbModel" "pc105"
	Option	    "XkbOptions" "grp:shift_toggle,grp_led:scroll"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Unknown"
	ModelName    "Unknown"
	HorizSync    30.0 - 110.0
	VertRefresh  50.0 - 150.0
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "Device0"
	Driver      "vesa"
	VendorName  "NVIDIA Corporation"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Device0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" "Enable"
EndSection

<b><span><KEEP IT BRUTAL></span></b>
Re: GeForce FX 5200 13.11.2010 19:23CORSAR
Нашел akmod-nvidia-173.14.15-1.fc9.5.i686.rpm но при установке выдает ошибку
'ascii' codec can't decode byte 0xd0 in position 68: ordinal not in range(128)

как с этим бороться??

<b><span><KEEP IT BRUTAL></span></b>
Re: GeForce FX 5200 13.11.2010 23:12BigAndy
Цитата:
kmod-nvidia-173.14.15-1.fc9.5.i686.rpm

Вы точно про ФЫЗДштгч говорите?

Re: GeForce FX 5200 13.11.2010 23:58DINETS
у юзера действительно АСП 14
и у него почти получилось НО как всегда НО
драйвера работают но при запуске гл гиарс они шестирёнки покрутятся и падают
и повторно уже не запускаются в дмесге вот что
fuse init (API version 7.9)
tomboy[2487]: segfault at c772f8 ip 00c772f8 sp bf98c11c error 4 in libbonoboui-2.0.mo[c84000+3000]
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
tomboy[3081]: segfault at b59362f8 ip b59362f8 sp bfd7173c error 4 in libkeyutils-1.2.so[b5943000+2000]
agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
nvidia 0000:02:00.0: putting AGP V3 device into 8x mode
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
NVRM: Xid (0002:00): 6, PE0000 0814 f000e816 00000000 00000000 00000000
Re: GeForce FX 5200 14.11.2010 00:21BigAndy
после установки akmod пересобрали модуль nvidia.ko? (для автоматической сборки должен быть запущен демон akmod.

Стесняюсь спросить, а kmod-nidia чем не подошел.

ДА, и сигфолтится у вас томбой.

Re: GeForce FX 5200 14.11.2010 13:38CORSAR
BigAndy Пишет:
-------------------------------------------------------
> после установки akmod пересобрали модуль
> nvidia.ko? (для автоматической сборки должен быть
> запущен демон akmod.
>
> Стесняюсь спросить, а kmod-nidia чем не подошел.
>
>
> ДА, и сигфолтится у вас томбой.

А как его пересобрать ? ))

Re: GeForce FX 5200 14.11.2010 14:02CORSAR
О, кажись всё работает нормально! Только работает оно слегка на так как нужно :

При перезагрузке компа (до того как появляется окно выбора пользователя) Показывается в графи4еском режиме уровень загрузки а под ним ссылка "Показать сведения" , нажимая на эту ссылку разворачивается окошко и я вижу :

Подключаются пространства подкачки из /etc/fstab :            [  OK  ] 
Checking kmods exist for 2.6.27.25-78.2.56.0.140asp.i686      [ВНИМАНИЕ] 
Ignoring nvidia-kmod as it failed earlier                     [ВНИМАНИЕ]

Hint: Some kmods were ignored or failed to build or install.
You can try to rebuild and install them by by calling
`/usr/sbin/akmods --force` as root.

Checking for module nvidia.ko:                              [  СБОЙ  ]
nvidia.ko for kernel 2.6.27.25-78.2.56.0.140asp.i686 was no [ВНИМАНИЕ]
The nvidia driver will not be enabled until one is found.   [ВНИМАНИЕ]
Driver already disabled.

Дальше всё загружается [ OK ] ...

Потом появляется окно логина...логинюсь,захожу в Х11 и читаю файл Xorg.conf
Драйвера с "nvidia" сменились на "vesa" ну и понятно что акселерация не пашет..

Далее я открываю терминал (под рутом) и запускаю nvidia-xconfig :

[root@localhost X11]# nvidia-xconfig

Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

[root@localhost X11]# 

Это , получается, драйвера создали свои конфиги. Проверяю- драйвер стал снова
"nvidia".

Далее Ctrl+Alt+Backspace , логинюсь и вуаля- драйвера работают!

Но при перезагрузке всё начинается с начала =(

Пытался делать :

Hint: Some kmods were ignored or failed to build or install.
You can try to rebuild and install them by by calling
`/usr/sbin/akmods --force` as root.

Выдало :

[corsar@localhost ~]$ su
Пароль: 
[root@localhost corsar]# /usr/sbin/akmods --force
Checking kmods exist for 2.6.27.25-78.2.56.0.140asp.i686   [ВНИМАНИЕ!]
Building and installing nvidia-kmod                        [ СБОЙ ]
Could not install newly built RPMs. You can find them and the logfile
173.14.15-1.5-for-2.6.27.25-78.2.56.0.140asp.i686.failed.log in /var/cache/akmods/nvidia/
cp: невозможно создать ссылку `/var/cache/akmods/nvidia/173.14.15-1.5-for-2.6.27.25-78.2.56.0.140asp.i686.failed.log': Файл существует

Hint: Some kmods were ignored or failed to build or install.
You can try to rebuild and install them by by calling
'/usr/sbin/akmods --force' as root.

[root@localhost corsar]# 

Как мне с этим бороться? Или хотя бы подскажите ,пожалуйста, как можно заставить линух при перезагрузке не менять xorg.conf .
Заранее преблагодарен)

Re: GeForce FX 5200 14.11.2010 18:04BigAndy
Ну так вам и написали как.
Цитата:
You can try to rebuild and install them by by calling
'/usr/sbin/akmods --force' as root.

Цитата:
Как мне с этим бороться? Или хотя бы подскажите ,пожалуйста, как можно заставить линух при перезагрузке не менять xorg.conf .

1) Убрать его из правил udev.
2) Уже забыл, какая имено, но опция была в xorg.conf? Кажется, AutoAddDevices, AutoEnableDevices

Re: GeForce FX 5200 14.11.2010 19:34CORSAR
О, зашел в папку /var/cache/akmods/nvidia/ и нашел там скомпилированый (я так думаю Улыбка ) файл :
kmod-nvidia-2.6.27.25-78.2.56.0.140asp.i686-173.14.15-1.0.140asp.5.i686.rpm , переставил предыдущий пакет на этот и заработало ! При загрузке 4то то там бухтит то же самое , но зато при перезагрузке xconf.org не меняется .

P.S. Спасибо, ты-мужик! Отлично! Отлично! Выпьем

<b><span><KEEP IT BRUTAL></span></b>
Re: GeForce FX 5200 15.11.2010 23:00DINETS
ну наконецто
Re: GeForce FX 5200 17.11.2010 00:29CORSAR
( . )( . )
<b><span><KEEP IT BRUTAL></span></b>
RSS-материал