Не работает оборудование на ноуте.

Автор: jogick Дата: 24.10.2007 23:38 Недавно купил ноут, поставил на него ASPLinux 11.2, и теперь воюю. Сразу рказалось что нет звука. Звуковая то есть определяется как ALC260, микрофон работает, а звука из динамиков нема. кроме того не работает встроенный кардридер, хоть и видится системой. В общем если кто может что знает, помогите.

[root@linux ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
06:07.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
06:07.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
06:07.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
06:07.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
Re: Не работает оборудование на ноуте. 25.10.2007 00:25BigAndy >Звуковая то есть определяется как ALC260, микрофон работает
Значит, звуковуха работает.
Уровни правильно выставлены и какую звуковую подсистему вы выбрали?
>роме того не работает встроенный кардридер
Что значит "не работает"? Dmesg что говорит?
Re: Не работает оборудование на ноуте. 25.10.2007 14:40jogick Уровни в регуляторе стоят почти на всю, пробовал менять,ничего. Нашёл выбор мультимедийных систем, но перебор ничего не дал из колонок тишина. Или нужно перезапускать систему?
Про кардридер. При подключении флэши должен появляться ещё один диск (по примеру с другой машины, где лин стоит с того же диска), а здесь нет.
Dmesg говорит:

[root@linux ~]# dmesg
Linux version 2.6.17-1.2157.1asp (build@amd64.asplinux.com.ua) (gcc version 4.0. 2 20051125 (Red Hat 4.0.2-8)) #1 Fri Aug 11 02:04:50 EEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f7c0000 (usable)
BIOS-e820: 000000001f7c0000 - 000000001f7ce000 (ACPI data)
BIOS-e820: 000000001f7ce000 - 000000001f800000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
503MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 128960
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 124864 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f88d0
ACPI: RSDT (v001 RoverC RovVW700 0x02000727 MSFT 0x00000097) @ 0x1f7c0000
ACPI: FADT (v002 RoverC OEMFACP 0x02000727 MSFT 0x00000097) @ 0x1f7c0200
ACPI: MADT (v001 RoverC OEMAPIC 0x02000727 MSFT 0x00000097) @ 0x1f7c0390
ACPI: MCFG (v001 RoverC OEMMCFG 0x02000727 MSFT 0x00000097) @ 0x1f7c03f0
ACPI: SLIC (v001 RoverC RovVW700 0x02000727 MSFT 0x00000097) @ 0x1f7c0430
ACPI: OEMB (v001 RoverC AMI_OEM 0x02000727 MSFT 0x00000097) @ 0x1f7ce040
ACPI: ASF! (v032 LEGEND I865PASF 0x00000001 INTL 0x02002026) @ 0x1f7c5530
ACPI: DSDT (v001 VrovUF VrovUF10 0x00000010 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
Built 1 zonelists
Kernel command line: root=/dev/sda6 ro reboot=b pci=noacpi pci=usepirqmask quie t rhgb resume=/dev/sda5 elevator=as
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c075a000 soft=c075b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1729.522 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 506424k/515840k available (1946k kernel code, 8932k reserved, 1271k data , 188k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3463.04 BogoMIPS (lpj=6926082)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 0000c109 0 0000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000140 0000c109 0000000 0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 08
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0ab8 (from 08b8)
ACPI Warning (utinit-0077): Invalid FADT value PM2_CNT_LEN=0 at offset 5A FADT=c 147b880 [20060127]
checking if image is initramfs... it is
Freeing initrd memory: 634k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/27b9] at 0000:00:1f.0
PCI: Found IRQ 7 for device 0000:00:1f.2
PCI: Sharing IRQ 7 with 0000:00:1b.0
PCI: Sharing IRQ 7 with 0000:00:1d.1
pnp: 00:0b: ioport range 0x400-0x41f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: c000-cfff
MEM window: fdf00000-fdffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: d000-dfff
MEM window: fe000000-fe7fffff
PREFETCH window: bdf00000-bfefffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: disabled.
PCI: Found IRQ 3 for device 0000:00:1c.0
PCI: Sharing IRQ 3 with 0000:00:02.0
PCI: Sharing IRQ 3 with 0000:00:1d.3
PCI: Sharing IRQ 3 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Found IRQ 4 for device 0000:00:1c.1
PCI: Sharing IRQ 4 with 0000:06:07.1
PCI: Sharing IRQ 4 with 0000:06:07.2
PCI: Sharing IRQ 4 with 0000:06:07.3
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Found IRQ 5 for device 0000:00:1c.2
PCI: Sharing IRQ 5 with 0000:00:1d.2
PCI: Sharing IRQ 5 with 0000:06:07.0
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1193320962.652:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 4DF8D5E3224757B9
- User ID: ASPLinux, Ltd. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Found IRQ 3 for device 0000:00:1c.0
PCI: Sharing IRQ 3 with 0000:00:02.0
PCI: Sharing IRQ 3 with 0000:00:1d.3
PCI: Sharing IRQ 3 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Found IRQ 4 for device 0000:00:1c.1
PCI: Sharing IRQ 4 with 0000:06:07.1
PCI: Sharing IRQ 4 with 0000:06:07.2
PCI: Sharing IRQ 4 with 0000:06:07.3
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Found IRQ 5 for device 0000:00:1c.2
PCI: Sharing IRQ 5 with 0000:00:1d.2
PCI: Sharing IRQ 5 with 0000:06:07.0
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c147dfc0), AE_BAD_HEADER
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Thermal Zone [THRM] (53 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdd: TSSTcorpCD/DVDW SN-S082D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:-PS2K,PNP0f13:-PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/sda5
PM: Checking swsusp image.
swsusp: Error -6 check for resume file
PM: Resume from disk failed.
swsusp: Resume From Partition /dev/sda5
PM: Checking swsusp image.
swsusp: Error -6 check for resume file
PM: Resume from disk failed.
ACPI wakeup devices:
P0P1 MC97 P0P7 P0P8 P0P9 HDAC P0P4 LID0
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 188k freed
Write protecting the kernel read-only data: 882k
SCSI subsystem initialized
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
PCI: Found IRQ 7 for device 0000:00:1f.2
PCI: Sharing IRQ 7 with 0000:00:1b.0
PCI: Sharing IRQ 7 with 0000:00:1d.1
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
input: AT Translated Set 2 keyboard as /class/input/input0
swsusp: Resume From Partition /dev/sda5
PM: Checking swsusp image.
swsusp: Error -6 check for resume file
PM: Resume from disk failed.
swsusp: Resume From Partition /dev/sda5
PM: Checking swsusp image.
swsusp: Error -6 check for resume file
PM: Resume from disk failed.
ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6163 85:3469 86:be09 87:6163 88:203f
ata1: dev 0 ATA-8, max UDMA/100, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: FUJITSU MHW2080B Rev: 0000
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB-)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB-)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
swsusp: Resume From Partition /dev/sda5
PM: Checking swsusp image.
swsusp: Error -6 check for resume file
PM: Resume from disk failed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
swsusp: Resume From Partition /dev/sda5
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
input: SynPS/2 Synaptics TouchPad as /class/input/input1
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
PM: Resume from disk failed.
audit(1193320965.096:2): selinux=0 auid=4294967295
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
PM: Resume from disk failed.
floppy0: no floppy controllers found
PCI: Found IRQ 3 for device 0000:01:00.0
PCI: Sharing IRQ 3 with 0000:00:02.0
PCI: Sharing IRQ 3 with 0000:00:1c.0
PCI: Sharing IRQ 3 with 0000:00:1d.3
sk98lin: Network Device Driver v8.34.1.3
(C)Copyright 1999-2006 Marvell(R).
PCI: Found IRQ 3 for device 0000:01:00.0
PCI: Sharing IRQ 3 with 0000:00:02.0
PCI: Sharing IRQ 3 with 0000:00:1c.0
PCI: Sharing IRQ 3 with 0000:00:1d.3
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: Marvell Yukon 88E8038 Fast Ethernet Controller
PrefPort:A RlmtMode:Check Link State
PCI: Found IRQ 7 for device 0000:00:1b.0
PCI: Sharing IRQ 7 with 0000:00:1d.1
PCI: Sharing IRQ 7 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sdhci: Secure Digital Host Controller Interface driver, 0.11
sdhci: Copyright(c) Pierre Ossman
PCI: Found IRQ 4 for device 0000:06:07.1
PCI: Sharing IRQ 4 with 0000:00:1c.1
PCI: Sharing IRQ 4 with 0000:06:07.2
PCI: Sharing IRQ 4 with 0000:06:07.3
mmc0: SDHCI at 0xfe8ff400 irq 4 PIO
hw_random: RNG not detected
PCI: Found IRQ 11 for device 0000:00:1d.7
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
swsusp: Resume From Partition 8:5
PM: Checking swsusp image.
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfeb3bc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
PM: Resume from disk failed.
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:1d.7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 7 for device 0000:00:1d.1
PCI: Sharing IRQ 7 with 0000:00:1b.0
PCI: Sharing IRQ 7 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 7, io base 0x0000e800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 5 for device 0000:00:1d.2
PCI: Sharing IRQ 5 with 0000:00:1c.2
PCI: Sharing IRQ 5 with 0000:06:07.0
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e480
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 3 for device 0000:00:1d.3
PCI: Sharing IRQ 3 with 0000:00:02.0
PCI: Sharing IRQ 3 with 0000:00:1c.0
PCI: Sharing IRQ 3 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 3, io base 0x0000e400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: HID 04d9:0499 as /class/input/input2
input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-1
ieee1394: Initialized config rom entry `ip1394'
PCI: Found IRQ 5 for device 0000:06:07.0
PCI: Sharing IRQ 5 with 0000:00:1c.2
PCI: Sharing IRQ 5 with 0000:00:1d.2
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] IR/IT contexts=[4/4]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00032521680037a4]
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
loop: loaded (max 8 devices)
EXT3 FS on sda6, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1542200k swap on /dev/sda5. Priority:-1 extents:1 across:1542200k
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: none
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
rx-polling: enabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit(1193306590.295:3): audit_pid=1744 old=0 by auid=4294967295
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
eth0: no IPv6 routers present
[drm] Initialized drm 1.0.1 20051102
PCI: Found IRQ 3 for device 0000:00:02.0
PCI: Sharing IRQ 3 with 0000:00:1c.0
PCI: Sharing IRQ 3 with 0000:00:1d.3
PCI: Sharing IRQ 3 with 0000:01:00.0
[drm] Initialized i915 1.4.0 20060119 on minor 0


Ещё вопрос как можно определить какое ещё вообще есть оборудование? А то как бы должен ещё быть встроенный модем и wifi или bluetooth адаптер.
Re: Не работает оборудование на ноуте. 25.10.2007 15:26BigAndy Бр-р-р.
Читайте сами такой вывод.
Вы сделайте diff или diff3 двух состояний - до и после подключения.

То что у вас не появилось-не очем не говорит. Возможо, если hal не поднят, то монтировать надо руками. Так даже лучше.

>Ещё вопрос как можно определить какое ещё вообще есть оборудование?
Хардкорно:
1 СПОСОБ: расковырять комп
2 способ: изучить документацию по девайсу
нехардкорно:
3 способ:
lspci
lsusb

>А то как бы должен ещё быть встроенный модем и wifi или
Интересно, а самому слабо прочитать вывод? Или вы хотите, чтобы за вас решили вашу проблемму? :E
>slamr: SmartLink AMRMO modem.
Re: Не работает оборудование на ноуте. 25.10.2007 15:41beduin jogick писал(а):
> Ещё вопрос как можно определить какое ещё вообще есть
> оборудование? А то как бы должен ещё быть встроенный модем и
> wifi или bluetooth адаптер.
если бы вы соизволили прочитать вывод **dmesg**, то нашли бы ответы на все ваши вопросы.
Re: Не работает оборудование на ноуте. 25.10.2007 20:13jogick Блин, если бы я понимал что всё это значит, я имею в виду весь этот бред от dmesg. Вы лучше скажите что мне со звуком делать?
Re: Не работает оборудование на ноуте. 25.10.2007 22:29beduin jogick писал(а):
>Вы лучше скажите что мне со звуком делать?
может так поможет:
звуковую систему постаставить для начала на авто, потом в командной строке запустить
/usr/bin/system-config-soundcard
Re: Не работает оборудование на ноуте. 25.10.2007 23:05jogick Интересно как это должно было помоч. Хотя бы теоретически.
Re: Не работает оборудование на ноуте. 25.10.2007 23:30BigAndy Ну, если Вы jogik такой специалист, то хрен ли вы сюда вопросы задаете?

>Блин, если бы я понимал что всё это значит, я имею в виду весь этот бред от dmesg
man dmesg
Если не можете разобраться в кратком выводе dmesg, то задайте еще параметр -v
между тем, вывод вполне читабелен и информативен.
>Вы лучше скажите что мне со звуком делать
1) Диагностировать проблемму
2) опредлить причину проблеммы
3) ликвидировать проблемму.

Вы даже не указали какой звуковой системой пользуетесь и как она настроена.

Возможно, если вы пользуетесь ALSA,вам придется ее обновить.
А пока вы сами не приложете усилий к настройке собственной системы, все советы будут звучать как шаманство.

За вас ваш комутер никто настраивать не будет.
Re: Не работает оборудование на ноуте. 26.10.2007 20:09jogick Я в лине новичёк, поэтому много дурацких вопросов. Прошу писать ответы с учётом этого фактора. Пробовал разные звуковые системы, эфект один и тот же.
Интересный параметр -v. Мой dmesg ругается на него и говорит что знает только -n, -c, -s. Man на англицком и понять о чём он тяжеловато.
Re: Не работает оборудование на ноуте. 27.10.2007 12:42BigAndy Тогда поехали по порядку.
Dmesg выводит сообщения о "состоянии" системы в момент вызова этого самого dmesg.
Но большинство сообщений будут одинаковыми.
Так что если вызвать его два раза, до и после события, можно посмотреть как состояние системы изменилось (другой способ посмотретть эти сообщение в логах, например, в /var/log/messages.
Но мы простыми путями не ходим, а ходим оптимальными. поэтому даем команду dmesg даем два раза: до и после события. И выведем сообщения в файлы out_0 и out_1.
Получим два почти одинаковых файла. Чтобы не вычитывать, что изменилось, применим команду diff к этим двум файлам.
Вот, например я воткнул блютус адаптер и получил:

$ dmesg > out_0
$ dmesg > out_1
$ diff out_1 out_0
328,334d327
< usb 4-1: new full speed USB device using uhci_hcd and address 2
< usb 4-1: device descriptor read/64, error -71
< usb 4-1: device descriptor read/64, error -71
< usb 4-1: new full speed USB device using uhci_hcd and address 3
< usb 4-1: configuration #1 chosen from 1 choice
< Bluetooth: HCI USB driver ver 2.9
< usbcore: registered new interface driver hci_usb

То есть у меня все в порядке, подключен успешно.

Вообще, в линуксе принято и надо знать немного больше про свою ось, нежели в виндус. Если вы ею администрируете. Вообще говоря, эти "мелочи" хорошо знать и в виндус, но в линуксе без данных знаний - никуда. Поскольку администрировать принято в cli интерфейсе.

Про параметр -v я действително не прав, видимо в 11.2 изменился синтаксис. Но этому параметру соотетствует -n с максимальным уровнем.
Видите, никто в линуксе не может чувствовать себя специалистом, поскольку система динамична. И дял этого придумана система внутренней справки man и более "мякая" info.
Здесь и далее, если от вас чего-то будут требовать, вам придется добиваться самостоятельно, поскольку всем новичкам азы объяснять невозможно.
Кроме того, приутсвует пункт 5 правил [community.asplinux.ru].
В общем, добивайтесь успеха сами. А мы здесь только пособить сможем. Или пользуйтесь официальной техподдержкой, но они будут задавать те же вопросы.
Это про кардридер.
Про звуковую подсистему все равно мало информации, чтобы вообще что-то предпринять.
Посмотрите командой lsmod, какой модуль звуковухи подключился, в modprobe.conf посмотрите как прописались алиасы для этой карточки. Далее будем поодумать.
Re: Не работает оборудование на ноуте. 06.11.2007 18:06Шиша такая же фигня. поставил линукс на ноут IBM T40. звуковая карта определяется, даже две. а звука нет. может есть какие то стандартные решения проблемы, подскажите ?
Re: Не работает оборудование на ноуте. 06.11.2007 18:17Bircoph Есть. Для начала предоставить диагностическую информацию.
Re: Не работает оборудование на ноуте. 06.11.2007 19:18Шиша набрал команду dmesg, получил примерно следующий результат:

Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
checking if image is initramfs... it is
Freeing initrd memory: 520k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Found ECDT
ACPI Exception (evregion-0409): AE_ERROR, Returned by Handler for [PCI_Config] [20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_SB_.PCI0.USB7._INI] (Node c3f6e5a0), AE_ERROR
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: c0100000-c01fffff
PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
IO window: 00004000-000040ff
IO window: 00004400-000044ff
PREFETCH window: e8000000-e9ffffff
MEM window: c2000000-c3ffffff
PCI: Bus 7, cardbus bridge: 0000:02:00.1
IO window: 00004800-000048ff
IO window: 00004c00-00004cff
PREFETCH window: ea000000-ebffffff
MEM window: c4000000-c5ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-8fff
MEM window: c0200000-cfffffff
PREFETCH window: e8000000-efffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:00.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1194375727.464:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 407A4C33B4DA055E
- User ID: ASPLinux, Ltd. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (46 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0a activated.
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt 0000:00:1f.6 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:-DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:-DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N030ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-R9012, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB-) w/1768KiB Cache, CHS=62016/15/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ACPI: PCI Interrupt 0000:02:00.1 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
swsusp: Resume From Partition /dev/hda1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
ACPI wakeup devices:
LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC9M
ACPI: (supports S0 S3 S4 S5)
input: AT Translated Set 2 keyboard as /class/input/input0
PM: Resume from disk failed.
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 929k
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1194375732.020:2): selinux=0 auid=4294967295
input: SynPS/2 Synaptics TouchPad as /class/input/input1
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
PM: Resume from disk failed.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
wlan: 0.8.4.2 (0.9.0)
PM: Resume from disk failed.
ath_rate_sample: no version for "ether_sprintf" found: kernel tainted.
ath_rate_sample: 1.2 (0.9.0)
ath_pci: 0.9.4.5 (0.9.0)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
IBM TrackPoint firmware: 0x0e, buttons: 3/3
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: H/W encryption support: WEP AES
wifi0: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3
wifi0: Use hw queue 0 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 0 for WME_AC_VI traffic
wifi0: Use hw queue 0 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5211: mem=0xc0210000, irq=11
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:3b:3f:df
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
input: TPPS/2 IBM TrackPoint as /class/input/input2
ACPI: PCI Interrupt 0000:00:1f.5 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55443 usecs
intel8x0: clocking to 48000
slamr: SmartLink AMRMO modem.
slamr: probe 8086:24c6 ICH4 card...
ACPI: PCI Interrupt 0000:00:1f.6 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
slamr: mc97 codec is SIL27
slamr: slamr0 is ICH4 card.
hw_random hardware driver 1.0.0 loaded
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1 -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
input: HID 04d9:0499 as /class/input/input3
swsusp: Resume From Partition 3:1
PM: Checking swsusp image.
input: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-2
PM: Resume from disk failed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: [ibm-acpi.sf.net]
ibm_acpi: dock device not present
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 8
Buffer I/O error on device hdc, logical block 2
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 12
Buffer I/O error on device hdc, logical block 3
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 16
Buffer I/O error on device hdc, logical block 4
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 20
Buffer I/O error on device hdc, logical block 5
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 24
Buffer I/O error on device hdc, logical block 6
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 28
Buffer I/O error on device hdc, logical block 7
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 4
Buffer I/O error on device hdc, logical block 1
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 772480
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 4
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 8
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 12
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 16
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 20
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 24
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 28
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 4
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 772480
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 0
EXT3 FS on hda2, internal journal
Adding 1810580k swap on /dev/hda1. Priority:-1 extents:1 across:1810580k
pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see [www.kernel.org] for details.
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x100-0x4ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x3b8-0x3df 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
ath0: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
audit(1194365081.603:3): audit_pid=1862 old=0 by auid=4294967295
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.24.0 20060225 on minor 0
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on old memory map
[drm] writeback test succeeded in 1 usecs
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=260.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1024x768
radeonfb: detected LVDS panel size from BIOS: 1024x768
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb (0000:01:00.0): ATI Radeon LW
application sox uses obsolete OSS audio interface

Re: Не работает оборудование на ноуте. 06.11.2007 23:16keng00ru Шиша,
BigAndy уже писал(а):
> Бр-р-р.
> Читайте сами такой вывод.
Ну и дальше по тексту...
Re: Не работает оборудование на ноуте. 07.11.2007 07:04aboris А микшером пользоваться не пробовали? Ну там звук включить, громкости добавить...
Re: Не работает оборудование на ноуте. 07.11.2007 18:31Шиша уж чего только не пробовал. разве что в бубен не бил. и алсамиксер обновлял, точнее пытался, по совету тех поддержки. в ответ получил что уже таковые установлены. и разные программы запускал. все без толку. а звук жизненно необходим. иначе соседка напротив доканает меня, ей поговорить не с кем. одно спасение - надеть наушники с музыкой.
Re: Не работает оборудование на ноуте. 08.11.2007 17:14jogick Самое интересное что с версией ядра новее чем 2.16.17 (даже 2.6.18) всё оборудование работает. Одно неприятно, самому обновить ядро пока не получается, а использовать другой дистрибутив где ядро поновее, но нет кое-каких программ, без которых скучно, тоже не катит. Так что сейчас другая проблема как обновить ядро.
Re: Не работает оборудование на ноуте. 08.11.2007 18:09bat yum update kernel kmod
Re: Не работает оборудование на ноуте. 09.11.2007 14:03jogick bat писал(а):

> yum update kernel kmod

Это конечно проще всего если траф халявный, а меня интересует сборка ядра из исходников.
RSS-материал