Display LCD

Автор: servit Дата: 10.06.2004 18:48 U menia prodoljenie problemi Грустный. Framebuffer postavil. Pohoje, ne pravil'no... Vot XF86Config:

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "fbdev" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "USB Mouse" "AlwaysCore"
InputDevice "Keyboard0" "CoreKeyboard"

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db";-). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "USB Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"

Section "Monitor"

# Option "dpms" # Does not work with ACPI
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell 1024x768 Laptop Display Panel"
DisplaySize 305 229
HorizSync 31.5 - 48.5
VertRefresh 59.0 - 75.0
# 1024x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 64.11 MHz
Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync
# 800x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 38.22 MHz
Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync
# 640x480 @ 60.00 Hz (GTF) hsync: 29.82 kHz; pclk: 23.86 MHz
Modeline "640x480_60.00" 23.86 640 656 720 800 480 481 484 497 -HSync +Vsync

Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 845"
VideoRam 65536

Section "Screen"
# Identifier "Screen0"
Driver "fbdev"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
Virtual 1024 768

Section "DRI"
Group 0
Mode 0666

Real'no ekran do sih por otkrit na 800x600, no sama rabochaya oblast' - 1024x768. Prrichem, esli kursor sdvigat' za kray - ekran dvigaetsia. Vot uj i v pravdu "Virtual" :-\

Pomogite - chto v etom faile ne pravil'no?

Zaranee spasibo...
Re: Display LCD 10.06.2004 20:20NSP
фреймбуфер к разрешению экрана отношения не имеет в данном случае

Modeline, DisplaySize, HorizSync, VertRefresh закрой, а Option "dpms" открой, если не поможет - читай внимательно /var/log/XFree86.0.log
Re: Display LCD 10.06.2004 23:09servit Не помогает. Экран все равно сжат до 800х600, а при заводе курсора за край - сдвигается... Может быть, мне сюда выкинуть XFree86.0.log? Я правда очень хочу разобраться... Но как об стену.